Datasheet4U Logo Datasheet4U.com

MAX5085 - Low-Quiescent-Current Linear Regulators

This page provides the datasheet information for the MAX5085, a member of the MAX5084 Low-Quiescent-Current Linear Regulators family.

Description

The MAX5084/MAX5085 high-voltage linear regulators operate from an input voltage range of 6.5V to 65V and deliver up to 200mA of output current.

These devices consume only 50µA (typ) of quiescent current with no load and 6µA (typ) in shutdown (EN pulled low).

Features

  • Wide Operating Input Voltage Range (6.5V to 65V).
  • Thermally Enhanced 3mm x 3mm 6-Pin TDFN Package Dissipates 1.905W at +70°C.
  • Guaranteed 200mA Output Current.
  • 50µA No-Load Supply Current.
  • Preset 3.3V, 5.0V, or Adjustable (from 2.54V to 11V) Output Voltage.
  • Remote Load Sense.
  • Thermal and Short-Circuit Protection.
  • -40°C to +125°C Operating Temperature Range.
  • SET Input for Adjustable Output Voltage.
  • Enable In.

📥 Download Datasheet

Datasheet preview – MAX5085

📁 Similar Datasheet

  • MAX500 - CMOS / Quad / Serial-Interface 8-Bit DAC (Maxim)
  • MAX5003 - High-Voltage PWM Power-Supply Controller (Maxim)
  • MAX501 - Voltage-Output / 12-Bit Multiplying DACs (Maxim)
  • MAX5012 - 12-Bit / 100Msps ECL DAC (Maxim)
  • MAX5013 - 12-Bit / 100Msps TTL DAC (Maxim)
  • MAX5014 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5015 - Current-Mode PWM Controllers (Maxim Integrated)
  • MAX5018 - 8-Bit / High-Speed DAC (Maxim)
  • MAX5019 - Current-Mode PWM Controllers with Integrated Startup Circuit (Maxim)
  • MAX502 - Voltage-Output / 12-Bit Multiplying DACs (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX5080 - 1A / 40V / MAXPower Step-Down DC-DC Converters
  • MAX5081 - 1A / 40V / MAXPower Step-Down DC-DC Converters
  • MAX5082 - 1.5A / 40V / MAXPower Step-Down DC-DC Converters
  • MAX5083 - 1.5A / 40V / MAXPower Step-Down DC-DC Converters
  • MAX5084 - Low-Quiescent-Current Linear Regulators
  • MAX5088 - 2.2MHz - 2A Buck Converters with an Integrated High-Side Switch
  • MAX5089 - 2.2MHz - 2A Buck Converters with an Integrated High-Side Switch
  • MAX5051 - Parallelable Clamped Two-Switch Power-Supply Controller IC

Full PDF Text Transcription

Click to expand full text
19-3928; Rev 0; 1/06 65V, 200mA, Low-Quiescent-Current Linear Regulators in TDFN General Description The MAX5084/MAX5085 high-voltage linear regulators operate from an input voltage range of 6.5V to 65V and deliver up to 200mA of output current. These devices consume only 50µA (typ) of quiescent current with no load and 6µA (typ) in shutdown (EN pulled low). Both devices include a SET input, which when connected to ground, selects a preset output voltage of 5V (MAX5084) or 3.3V (MAX5085). Alternatively, the output voltage can be adjusted from 2.54V to 11V by connecting the SET pin to the regulator’s output through a resistive divider network.
Published: |