MAX8712 Datasheet | Maxim Integrated

Description Features - High-Performance Linear Regulator 1.6% Output Accuracy Works with Small Ceramic Output Capacitors Fast Transient Response Foldback Current Limit - 50m A Negative Regulated Charge Pump - 20m A Positive Regulated Charge Pump with Adjustable Delay - Built-In Power-Up Sequence - High-Current Operational Amplifier (MAX8710/MAX8711/MAX8761) ±150m A Output Short-Circuit Current 12V/µs Slew Rate 12MHz, -3d B Bandwidth Rail-to-Rail Inputs/Output - Dual-Mode™ High-Voltage Switches (MAX8710/MAX8761) - Thermal Protection - Latched Fault Protection with Timer MAX8710/MAX8711/MAX8712/MAX8761 The MAX8710/MAX8711/MAX8712/MAX8761 offer plete linear-regulator power-supply solutions for thin-film transistor (TFT) liquid-crystal-display (LCD) panels used in LCD monitors and LCD TVs. All four devices include a high-performance AV DD linear regulator, a positive charge-pump regulator, a negative charge-pump regulator, and built-in power-up sequence control. The MAX8710/MAX8711/MAX8761 also include a high-current operational amplifier. Additionally, the MAX8710/ MAX8761 provide logic-controlled high-voltage switches to control the positive charge-pump output. The linear regulator directly steps down the input voltage to generate the supply voltage for the source-driver ICs (AV DD ). The two built-in charge-pump regulators are used to generate the TFT gate-on and gate-off supplies. The high-current operational amplifier is typically used to drive the LCD backplane (V) and features high output current (150m A), fast slew rate (12V/µs), and wide bandwidth (12MHz). Its rail-to-rail inputs and output maximize flexibility. The MAX8710/MAX8761 are available in a 24-pin thin QFN package, the MAX8711 is available in a 16-pin thin QFN package, and the MAX8712 is available in a 12-pin thin QFN package. All three packages are 4mm x 4mm with a maximum thickness of 0.8mm for ultra-thin LCD panel design. The MAX8710/MAX8711/MAX8712 operate over the -40°C to +100°C temperature range...