Datasheet4U Logo Datasheet4U.com

PL613-01 - 8-Output Clock

Description

The PL613-01 is an advanced triple PLL design based on PicoPLLTM, world’s smallest programmable clock, technology.

This advanced technology allows the 8 output PL613-01 to fit in to a small 3mmx3mm QFN package or (T)SSOP for high performance, lowpower, low-cost applications.

Features

  • of these products is mentioned in the following paragraphs. PLL Programming The three PLLs in PL613-01 are fully programmable. Each PLL is equipped with an 8-bit input frequency divider (R-Counter) and an 11-bit VCO frequency feedback loop (M-Counter) divider. The three PLL outputs are transferred to five 5-bit post VCO, Odd/Even dividers (P-Counter), as shown in the above diagrams. In addition, there are three optional (÷1, ÷2, ÷4 or ÷8) post P-Counter dividers, that can further divide the VCO.

📥 Download Datasheet

Datasheet Details

Part number PL613-01
Manufacturer Micrel
File Size 481.79 KB
Description 8-Output Clock
Datasheet download datasheet PL613-01 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PL613-01 8-Output Clock Microchip
PL613-05 3-Output Clock PhaseLink Corporation
PL613-21 Programmable 3-PLL Clock PhaseLink Corporation
PL610-01 Single IC XO Microchip
PL610-01 1MHz to 130MHz XO IC PhaseLink Corporation

Other Datasheets by Micrel

Part Number Description
PL613-21 Programmable 3-PLL Clock
PL610-01 1MHz to 130MHz XO IC
PL602-00 Multiplier XO IC Die
PL602-03 Low Phase Noise CMOS XO
PL602-04 Low Phase Noise CMOS XO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PL613-01 1.8V to 3.3V, PicoPLL, 3-PLL, 200MHz, 8 Output Clock IC FE AT UR E S  Designed for PCB space savings with 3 low-power Programmable PLLs and up to 8 clock outputs.  Low-Power Consumption o 10µA typical when PDB is activated  Output Frequency: o <110MHz @ 1.8V operation o <166MHz @ 2.5V operation o <200MHz @ 3.3V operation  Input Frequency: o Fundamental Crystal: 10MHz to 40MHz o Reference Input: 10MHz to 200MHz  Programmable I/O pins can be configured as Output Enable (OE), Configuration Switching (CSEL), Frequency Switching (FSELX), Power Down (PDB) inputs, or Clock outputs.  Disabled outputs programmable as HiZ or Active Low  Four distinct configurations selectable with CSEL[0:1]  Single 1.8V, 2.5V, or 3.
Published: |