Motorola Electronic Components Datasheet

MOCD217 Datasheet

DUAL CHANNEL SMALL OUTLINE OPTOISOLATOR TRANSISTOR OUTPUT

No Preview Available !

MOTOROLA

SEMICONDUCTOR TECHNICAL DATA

Dual Channel

Small Outline Optoisolators

Transistor Output (Low Input Current)

The MOCD217 device consists of two gallium arsenide infrared emitting

diodes optically coupled to two monolithic silicon phototransistor detectors, in a

surface mountable, small outline, plastic package. It is ideally suited for high

density applications and eliminates the need for through–the–board mounting.

• Dual Channel Coupler

• Convenient Plastic SOIC–8 Surface Mountable Package Style

• Low Input Current (Specified @ 1 mA)

• Minimum V(BR)CEO of 30 Volts Guaranteed

• Standard SOIC–8 Footprint, with 0.050″ Lead Spacing

• Shipped in Tape and Reel, which conforms to EIA Standard RS481A

• Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering

• High Input–Output Isolation of 3000 Vac (rms) Guaranteed

• Meets U.L. Regulatory Requirements, File #E54915

Ordering Information:

• To obtain MOCD217 in tape and reel, add R2 suffix to device number as follows:

R2 = 2500 units on 13″ reel

• To obtain MOCD217 in quantities of 50 (shipped in sleeves) — no suffix

Marking Information:

• MOCD217 = D217

MAXIMUM RATINGS (TA = 25°C unless otherwise noted)

Rating

Symbol

Value

INPUT LED

Forward Current — Continuous

Forward Current — Peak (PW = 100 µs, 120 pps)

Reverse Voltage

LED Power Dissipation @ TA = 25°C

Derate above 25°C

IF(pk)

1.0

6.0

0.8

OUTPUT TRANSISTOR

Collector–Emitter Voltage

Collector–Base Voltage

Emitter–Collector Voltage

Collector Current — Continuous

Detector Power Dissipation @ TA = 25°C

Derate above 25°C

VCEO

VCBO

VECO

7.0

150

1.76

NOTE: Thickness through insulation between input and output is ≥ 0.5 mm.

Unit

mW/°C

Order this document

by MOCD217/D

MOCD217

[CTR = 100% Min]

Motorola Preferred Device

DUAL CHANNEL

SMALL OUTLINE

OPTOISOLATOR

TRANSISTOR OUTPUT

CASE 846–01, STYLE 3

PLASTIC

SCHEMATIC

1. ANODE 1

2. CATHODE 1

3. ANODE 2

4. CATHODE 2

5. EMITTER 2

6. COLLECTOR 2

7. EMITTER 1

8. COLLECTOR 1

Preferred devices are Motorola recommended choices for future use and best overall value.

REV 2

©MMoottoorroolal,aInOc.p1t9o9e5lectronics Device Data

Motorola Electronic Components Datasheet

MOCD217 Datasheet

DUAL CHANNEL SMALL OUTLINE OPTOISOLATOR TRANSISTOR OUTPUT

No Preview Available !

MOCD217

MAXIMUM RATINGS — continued (TA = 25°C unless otherwise noted)

Rating

TOTAL DEVICE

Input–Output Isolation Voltage(1,2)

(60 Hz, 1.0 sec. duration)

Symbol

VISO

Total Device Power Dissipation @ TA = 25°C

Derate above 25°C

Ambient Operating Temperature Range(3)

Storage Temperature Range(3)

Lead Soldering Temperature

(1/16″ from case, 10 sec. duration)

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)(4)

Tstg

—

Characteristic

Symbol

Min

INPUT LED

Forward Voltage (IF = 1.0 mA)

VF —

Reverse Leakage Current (VR = 6.0 V)

Capacitance

IR —

C—

OUTPUT TRANSISTOR

Collector–Emitter Dark Current

(VCE = 5.0 V, TA = 25°C)

(VCE = 5.0 V, TA = 100°C)

Collector–Emitter Breakdown Voltage (IC = 100 µA)

Emitter–Collector Breakdown Voltage (IE = 100 µA)

Collector–Emitter Capacitance (f = 1.0 MHz, VCE = 0)

COUPLED

Output Collector Current

(IF = 1.0 mA, VCE = 5.0 V)

MOCD217

ICEO1

ICEO2

V(BR)CEO

V(BR)ECO

CCE

IC (CTR)(5)

—

7.0

—

1.0 (100)

Collector–Emitter Saturation Voltage (IC = 100 µA, IF = 1.0 mA)

VCE(sat)

—

Turn–On Time (IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)

ton —

Turn–Off Time (IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)

toff —

Rise Time (IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)

tr —

Fall Time (IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)

Input–Output Isolation Voltage (f = 60 Hz, t = 1.0 sec.)(1,2)

Isolation Resistance (VI–O = 500 V)(2)

Isolation Capacitance (VI–O = 0, f = 1.0 MHz)(2)

VISO

RISO

CISO

—

3000

1011

—

1. Input–Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating.

2. For this test, pins 1, 2, 3 and 4 are common, and pins 5, 6, 7 and 8 are common.

3. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.

4. Always design to the specified minimum/maximum electrical limits (where applicable).

5. Current Transfer Ratio (CTR) = IC/IF x 100%.

Value

3000

250

2.94

–55 to +100

–55 to +150

260

Typ(4)

1.05

0.1

1.0

7.8

7.0

1.3 (130)

0.35

7.5

5.7

3.2

4.7

—

0.2

Max

1.3

100

—

0.4

—

Unit

Vac(rms)

mW/°C

°C

Unit

µA

mA (%)

µs

Vac(rms)

Ω

2 Motorola Optoelectronics Device Data

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf

MOCD217 Datasheet

DUAL CHANNEL SMALL OUTLINE OPTOISOLATOR TRANSISTOR OUTPUT

MOCD217 Datasheet

DUAL CHANNEL SMALL OUTLINE OPTOISOLATOR TRANSISTOR OUTPUT

Similar Datasheet

Part Number Start With