Datasheet4U Logo Datasheet4U.com

UPD16876 - Single Pch High-Side Switch for USB

Description

The µPD16876 is a power switch IC with an overcurrent limiter that is used for the power bus of a Universal Serial Bus (USB).

This product has one Pch power MOSFET circuits, which has a low-on resistance (100 mΩ TYP.), in its switching block.

Features

  • One P-ch power MOSFET circuit Overcurrent detector that outputs active-low control signal from detection report pin Overcurrent limiter to prevent system voltage drop Thermal shutdown circuit Undervoltage lockout circuit This control circuit can be turned on and off independently of the others by a control pin. 8-pin SOP package.

📥 Download Datasheet

Datasheet preview – UPD16876

Datasheet Details

Part number UPD16876
Manufacturer NEC Electronics
File Size 125.17 KB
Description Single Pch High-Side Switch for USB
Datasheet download datasheet UPD16876 Datasheet
Additional preview pages of the UPD16876 datasheet.

📁 Similar Datasheet

  • UPD16873 - MONOLITHIC 3-ASPECT SPINDLE MOTOR DRIVER (NEC)
  • UPD16873A - MONOLITHIC 3-ASPECT SPINDLE MOTOR DRIVER (NEC)
  • UPD16873B - MONOLITHIC 3-ASPECT SPINDLE MOTOR DRIVER (NEC)
  • UPD16873C - MONOLITHIC 3-ASPECT SPINDLE MOTOR DRIVER (NEC)
  • UPD16877 - MONOLITHIC QUAD H-BRIDGE DRIVER CIRCUIT (NEC)
  • UPD16879 - MONOLITHIC QUAD H BRIDGE DRIVER CIRCUIT (NEC)
  • UPD168001 - MONOLITHIC 4-CHANNEL H BRIDGE LOW-SIDE SWITCH (NEC)
  • UPD168002 - MONOLITHIC 6-CHANNEL H-BRIDGE DRIVER (NEC)
  • UPD16803 - MONOLITHIC DUAL H BRIDGE DRIVER CIRCUIT (NEC)
  • UPD16804 - MONOLITHIC H BRIDGE DRIVER CIRCUIT (NEC)
Other Datasheets by NEC Electronics

Full PDF Text Transcription

Click to expand full text
DATA SHEET MOS INTEGRATED CIRCUIT µPD16876 SINGLE Pch HIGH-SIDE SWITCH FOR USB DESCRIPTION The µPD16876 is a power switch IC with an overcurrent limiter that is used for the power bus of a Universal Serial Bus (USB). This product has one Pch power MOSFET circuits, which has a low-on resistance (100 mΩ TYP.), in its switching block. This product boasts an operating current consumption of as low as 100 µA (MAX.). In addition, the IC is also equipped with an overcurrent detector that is essential for a host/hub controller conforming to the USB Standard, so that the IC can report an overcurrent to the controller. Moreover, a thermal shutdown circuit and an undervoltage lockout circuit are also provided as the protection circuits of the IC.
Published: |