74AUP1G126 driver equivalent, low-power buffer/line driver.
* Wide supply voltage range from 0.8 V to 3.6 V
* High noise immunity
* Complies with JEDEC standards:
* JESD8-12 (0.8 V to 1.3 V)
* JESD8-11 (0.9 V t.
using IOFF. The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is.
The 74AUP1G126 provides a single non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (OE). A LOW level at pin OE causes the output to assume a high-impedance OFF-state. This device has the.
Image gallery
Download