KMA310A Datasheet | NXP Semiconductors

description The KMA310/A is a single channel magnetic angle sensor. Magnetoresistive (MR) sensor bridges and mixed signal IC are integrated into a single package. The module has integrated filters and is optimized for PCB-less designs. The IC allows user-specific adjustments of angular range, zero angle, and clamping voltages. The settings are stored permanently in a non-volatile memory (NVM). The programmable angle sensor is pre-programmed, pre-calibrated and therefore, ready to use. 2 Features and benefits - High precision sensor for magnetic angular - High temperature range up to 180 °C measurement - Ratiometric analog output voltage or push pull - Single package sensor module with output stage pliant with SAE J2716 SENT integrated filters for improved electromagnetic using pulse shaping patibility (EMC) - Overvoltage protection up to 18 V - Automotive qualified in accordance with AEC-Q100 Rev-H - Programmable user adjustments, e.g. zero angle and angular range - Fail-safe non-volatile memory with write protection using lock bit - Independent from magnetic field strength above 25 k A/m - Module ready to use without external ponents - Factory calibrated - Power-loss detection - Programming via one-wire interface (OWI) - 8 × 12-bit original equipment manufacturer (OEM) code registers for identification (ID) - ISO 26262 ASIL-C capable, safety element out of context (SEoo C) - Multipoint calibration (MPC) with 17 equidistant or seven free selectable calibration points - Low latency - Separate temperature sensor and auxiliary analog-to-digital converter (ADC) for input stage supervision NXP Semiconductors 3 Pinning information Table 1. Pinning Pin Symbol 1 VDD 2 GND 3 OUT/DATA Description supply voltage ground analog/single edge nibble transmission (SENT) output or data interface KMA310/A Programmable angle sensor IC Simplified outline 4 Ordering information Table 2. Ordering information Type number Package Name Description KMA310/A SIL3...