KMA320A Datasheet | NXP Semiconductors

description The KMA320/A is a dual channel magnetic angle sensor. Magnetoresistive (MR) sensor bridges and mixed signal ICs are integrated into a single package. The module has integrated filters and is optimized for PCB-less designs. The KMA320/A dual channel sensor module has mon power supply terminals for both channels. Further explanations are referring to a single channel and apply independently to each output of the dual channel device. The IC allows user-specific adjustments of angular range, zero angle, and clamping voltages. The settings are stored permanently in a non-volatile memory (NVM). The programmable angle sensors are pre-programmed, pre-calibrated and therefore, ready to use. 2 Features and benefits - High precision sensor for magnetic angular - High temperature range up to 180 °C measurement - Ratiometric analog output voltage or push pull - Single package sensor module with output stage pliant with SAE J2716 SENT integrated filters for improved electromagnetic using pulse shaping patibility (EMC) - Overvoltage protection up to 18 V - Automotive qualified in accordance with AEC-Q100 Rev-H - Programmable user adjustments, e.g. zero angle and angular range - Fail-safe non-volatile memory with write protection using lock bit - Independent from magnetic field strength above 25 k A/m - Module ready to use without external ponents - Power-loss detection - Programming via separated one-wire interfaces (OWIs) - 8 × 12-bit original equipment manufacturer (OEM) code registers for identification (ID) - ISO 26262 ASIL-C capable for each channel, safety element out of context (SEoo C) - Multipoint calibration (MPC) with 17 equidistant or seven free selectable calibration points - Factory calibrated - Low latency - Separate temperature sensor and auxiliary - Dual channel sensor module analog-to-digital converter (ADC) for magnetic field conversion check NXP Semiconductors KMA320/A Dual channel programmable angle sensor IC 3 Pinning...