900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

KMZ80 Datasheet

Programmable angle sensor

No Preview Available !

KMZ80
Programmable angle sensor IC
Rev. 3 — 26 April 2019
Product data sheet
1 General description
The KMZ80 is a single channel magnetic angle sensor. Magnetoresistive (MR) sensor
bridges and mixed signal IC are integrated into a single package. The KMZ80 in SO8
package is intended for printed-circuit boards (PCBs) where external filter components
are required. The IC allows user-specific adjustments of angular range, zero angle, and
clamping voltages. The settings are stored permanently in a non-volatile memory (NVM).
The programmable angle sensor is pre-programmed, pre-calibrated and therefore, ready
to use.
2 Features and benefits
High precision sensor for magnetic angular High temperature range up to 150 °C
measurement
Ratiometric analog output voltage or push pull
Single package sensor
output stage compliant with SAE J2716 SENT
Automotive qualified in accordance with
AEC-Q100 Rev-H
using pulse shaping
Overvoltage protection up to 18 V
Programmable user adjustments, e.g. zero Power-loss detection
angle and angular range
Programming via one-wire interface (OWI)
Fail-safe non-volatile memory with write
protection using lock bit
8 × 12-bit original equipment manufacturer
(OEM) code registers for identification (ID)
Independent from magnetic field strength
above 25 kA/m
ISO 26262 ASIL-C capable, safety element
out of context (SEooC)
Factory calibrated
Multipoint calibration (MPC) with
Separate temperature sensor and auxiliary
17 equidistant or seven free selectable
analog-to-digital converter (ADC) for magnetic calibration points
field conversion check
Low latency


NXP Semiconductors Electronic Components Datasheet

KMZ80 Datasheet

Programmable angle sensor

No Preview Available !

NXP Semiconductors
KMZ80
Programmable angle sensor IC
3 Pinning information
Table 1. Pinning
Pin Symbol
1 n.c.
2 VDD
3 VDD
4 GND
5 OUT/DATA
6 n.c.
7 n.c.
8 n.c.
Description
not connected
supply voltage
supply voltage
ground
analog/single edge nibble transmission
(SENT) output or data interface
not connected
not connected
not connected
Simplified outline
8
1
4 Ordering information
Table 2. Ordering information
Type number
Package
Name
KMZ80
SO8
Description
plastic small outline package; 8 leads; body width 3.9 mm
5
4
Version
SOT96-1
KMZ80
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 26 April 2019
© NXP B.V. 2019. All rights reserved.
2 / 71


Part Number KMZ80
Description Programmable angle sensor
Maker NXP
Total Page 3 Pages
PDF Download

KMZ80 Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 KMZ80 Programmable angle sensor
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy