LPC11A11 Overview
LPC11Axx 32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash, 8 kB SRAM, 4 kB EEPROM; configurable analog/mixed-signal Rev. 4 — 30 October 2012 Product data sheet 1. General The LPC11Axx are an ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size pared to existing 8/16-bit...
LPC11A11 Key Features
- System
- ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
- ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC)
- Serial Wire Debug (SWD)
- JTAG boundary scan
- System tick timer
- Memory
- Up to 32 kB on-chip flash program memory
- Up to 4 kB on-chip EEPROM data memory; byte erasable and byte programmable
- Up to 8 kB SRAM data memory
LPC11A11 Applications
- System: ARM Cortex-M0 processor, running at frequencies of up to 50 MHz. ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC). Serial Wire D
- Memory: Up to 32 kB on-chip flash program memory. Up to 4 kB on-chip EEPROM data memory; byte erasable and byte programmable. Up to 8 kB SRAM data memory.
- Digital peripherals: Up to 42 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, repeater mode, and open-drain mode