Datasheet4U Logo Datasheet4U.com

MPC17511A - H-Bridge Motor Driver

General Description

Definition Charge pump bucket capacitor 2 (negative pole).

Charge pump bucket capacitor 1 (positive pole).

Charge pump bucket capacitor 1 (negative pole).

Key Features

  • 2.0V to 6.8V Continuous Operation.
  • Output Current 1.0 A(DC), 3.0A (Peak).
  • MOSFETs < 600 m RDS(ON) @ 25C Guaranteed.
  • 3.0V/5.0V TTL-/CMOS-Compatible Inputs.
  • PWM Frequencies up to 200 kHz.
  • Undervoltage Shutdown.
  • Cross-Conduction Suppression.
  • Low Power Consumption.
  • Pb-Free Packaging Designated by Suffix Codes EV and EP Document Number: MPC17511A Rev. 5.0, 9/2008 17511A H-BRIDGE MOTOR DRIVER IC EV SUFFIX (PB-FREE) 9.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPC17517 1.0 A 6.8 V Dual Motor Driver Freescale Semiconductor
MPC1710A Smart MOS H-Bridge Motor Control Motorola Semiconductor
MPC17A34RVMEL 4-Ch H-Bridge Motor Driver ETC
MPC17C724 0.4A Dual H-Bridge Motor Driver Freescale Semiconductor
MPC100 Wide Bandwidth 4 x 1 VIDEO MULTIPLEXER Burr-Brown

Other Datasheets by NXP Semiconductors

Part Number Description
MPC17511 H-Bridge Motor Driver
MPC17510 1.2A 15V H-Bridge motor driver
MPC17529 dual H-Bridge motor driver
MPC17531A dual H-Bridge motor driver
MPC17533 Dual H-Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor Technical Data 1.0 A 6.8 V H-Bridge Motor Driver IC The 17511A is a monolithic H-Bridge designed to be used in portable electronic applications to control small DC motors or bipolar step motors. End applications include head positioners (CDROM or disk drive), camera focus motors, and camera shutter solenoids. The 17511A can operate efficiently with supply voltages as low as 2.0V to as high as 6.8V. Its low RDS(ON) H-Bridge output MOSFETs (0.46  typical) can provide continuos motor drive currents of 1.0A and handle peak currents up to 3.0A. It is easily interfaced to low-cost MCUs via parallel 3.0V- or 5.0V- compatible logic. The device can be pulse width modulated (PWM-ed) at up to 200 kHz.