Datasheet4U Logo Datasheet4U.com

PCA9505 - 40-bit I2C-bus I/O port

Download the PCA9505 datasheet PDF (PCA9506 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for 40-bit i2c-bus i/o port.

Description

The PCA9505/PCA9506 provide 40-bit parallel input/output (I/O) port expansion for I2Cbus applications organized in 5 banks of 8 I/Os.

At 5 V supply voltage, the outputs are capable of sourcing 10 mA and sinking 15 mA with a total package load of 600 mA to allow direct driving of 40 LEDs.

Features

  • Standard mode (100 kHz) and Fast mode (400 kHz) compatible I2C-bus serial interface.
  • 2.3 V to 5.5 V operation with 5.5 V tolerant I/Os.
  • 40 configurable I/O pins that default to inputs at power-up.
  • PCA9505 includes 100 kΩ internal pull-up resistors on all the I/Os.
  • Outputs:.
  • Totem-pole (10 mA source, 15 mA sink) with controlled edge rate output structure.
  • Active LOW output enable (OE) input pin 3-states all outputs.
  • Output s.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (PCA9506_NXPSemiconductors.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • PCA9502 - 8-bit I/O expander (NXP Semiconductors)
  • PCA9506 - 40-bit I2C-bus I/O port (NXP Semiconductors)
  • PCA9507 - 2-wire serial bus extender (NXP Semiconductors)
  • PCA9510A - Hot swappable I2C-bus and SMBus bus buffer (NXP Semiconductors)
  • PCA9511A - Hot swappable I2C-bus and SMBus bus buffer (NXP Semiconductors)
  • PCA9513 - Hot swappable I2C and SMBus bus buffer (Philips)
  • PCA9513A - Hot swappable I2C-bus and SMBus bus buffer (NXP Semiconductors)
  • PCA9514 - Hot swappable I2C and SMBus bus buffer (Philips)
  • PCA9514A - Hot swappable I2C-bus and SMBus bus buffer (NXP Semiconductors)
  • PCA9515A - Dual Bidirectional I2C Bus and SMBus Repeater (Texas Instruments)
Other Datasheets by NXP
  • PCA9500 - 8-bit I2C and SMBus I/O port
  • PCA9501 - 8-bit I2C and SMBus I/O port
  • PCA9504A - Glue chip 4
  • PCA9508 - Hot swappable level translating I2C-bus repeater
  • PCA9509 - Level translating I2C-bus/SMBus repeater
  • PCA9510 - Hot swappable I2C and SMBus bus buffer
  • PCA9511 - Hot swappable I2C and SMBus bus buffer
  • PCA9512 - Level shifting hot swappable I2C and SMBus buffer

Full PDF Text Transcription

Click to expand full text
PCA9505_9506 40-bit I2C-bus I/O port with RESET, OE and INT Rev. 5 — 30 September 2021 Product data sheet 1 General description The PCA9505/PCA9506 provide 40-bit parallel input/output (I/O) port expansion for I2Cbus applications organized in 5 banks of 8 I/Os. At 5 V supply voltage, the outputs are capable of sourcing 10 mA and sinking 15 mA with a total package load of 600 mA to allow direct driving of 40 LEDs. Any of the 40 I/O ports can be configured as an input or output. Output ports are totem-pole and their logic state changes at the Acknowledge (bank change). The PCA9505 is identical to the PCA9506 except that it includes 100 kΩ internal pull-up resistors on all the I/Os.
Published: |