PN7360 Datasheet | NXP Semiconductors

description The PN736X family is a family of 32-bit ARM Cortex-M0-based NFC microcontrollers offering high performance and low power consumption. It has a simple instruction set and memory addressing along with a reduced code size pared to existing architectures. PN736Xoffers an all in one solution, with features such as NFC, microcontroller, and software in a single chip. It operates at CPU frequencies of up to 20 MHz. It is part of the PN7462AU product family which offers a mon set of features , library and tools. The peripheral plement of the PN736X microcontroller includes 160/80 k B of flash memory, 12 k B of SRAM data memory and 4 k B EEPROM. It also includes one host interface with either high-speed mode I2C-bus, SPI, USB or high-speed UART, and two master interfaces, SPI and Fast-mode Plus I2C-bus. Four general-purpose counter/ timers, a random number generator, one CRC coprocessor and up to 21 general-purpose I/O pins are also available. The PN736X NFC microcontroller offer a one chip solution to build contactless applications. It is equipped with a highly integrated high-power output NFC-IC for contactless munication at 13.56 MHz enabling EMV-pliance on RF level, without additional external active ponents. PN736X supports the following operating modes: - ISO/IEC 14443-A and B, MIFARE - JIS X 6319-4 (parable with Feli Ca scheme) - ISO/IEC 15693, ICODE, ISO/IEC 18000-3 mode 3 - NFC protocols - tag reader/writer, P2P - ISO/IEC 14443- type A card emulation - EMVCo pliance NXP Semiconductors 2 Features and benefits PN736X NFC Cortex-M0 microcontroller 2.1 Integrated contactless interface frontend - High RF output power frontend IC for transfer speed up to 848 kbit/s - NFC IP1 and NFC IP2 support - Full NFC tag support (type 1, type 2, type 3, type 4A and type 4B) - P2P active and passive, target and initiator - Card emulation ISO14443 type A - ISO/IEC 14443 type A and type B - MIFARE classic card - ISO/IEC 15693, and ISO/IEC 18000-3 mode 3 - Low-power card...