Datasheet Details
| Part number | SE95 |
|---|---|
| Manufacturer | NXP Semiconductors |
| File Size | 150.11 KB |
| Description | Ultra high accuracy digital temperature sensor and thermal Watchdog |
| Download | SE95 Download (PDF) |
|
|
| Part number | SE95 |
|---|---|
| Manufacturer | NXP Semiconductors |
| File Size | 150.11 KB |
| Description | Ultra high accuracy digital temperature sensor and thermal Watchdog |
| Download | SE95 Download (PDF) |
|
|
|
The SE95 is a temperature-to-digital converter using an on-chip band gap temperature sensor and Sigma Delta analog-to-digital conversion technique.
The device is also a thermal detector providing an overtemperature detection output.
The SE95 contains a number of data registers accessed by a controller via the 2-wire serial I2C-bus interface: • Configuration register (Conf) to store the device settings such as sampling rate, device operation mode, OS operation mode, OS polarity, and OS fault queue • Temperature register (Temp) to store the digital Temp reading • Set-point registers (Tos and Thyst) to store programmable overtemperature shutdown and hysteresis limits • Identification register (ID) to store manufacturer numbers The device includes an open-drain output (pin OS) which becomes active when the temperature exceeds the programmed limits.
SE95 Ultra high accuracy digital temperature sensor and thermal watchdog Rev.
07 — 2 September 2009 Product data sheet 1.
| Part Number | Description |
|---|---|
| SE97 | DDR memory module temp sensor |
| SE97B | DDR memory module temp sensor |
| SE98 | SO-DIMM SMBus/I2C-bus temperature sensor |