Datasheet4U Logo Datasheet4U.com

54ACT574 - Octal D-Type Flip-Flop

Download the 54ACT574 datasheet PDF. This datasheet also covers the 54AC574 variant, as both devices belong to the same octal d-type flip-flop family and are provided as variant models within a single manufacturer datasheet.

Description

The ’AC/’ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE).

The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CP) transition.

Features

  • n ICC and IOZ reduced by 50% n Inputs and outputs on opposite sides of package allowing easy interface with microprocessors n Useful as input or output port for microprocessors n Functionally identical to ’AC/’ACT374 n TRI-STATE outputs for bus-oriented.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (54AC574_NationalSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
54ACT00 Quadruple 2-Input Positive-NAND Gates Texas Instruments
54ACT11000 QUADRUPLE 2-INPUT POSITIVE-NAND GATES Texas Instruments
54ACT11002 QUADRUPLE 2-INPUT POSITIVE-NOR GATES Texas Instruments
54ACT11010 Triple 3-Input Positive-NAND Gates Texas Instruments
54ACT11011 TRIPLE 3-INPUT POSITIVE-AND GATES Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
54ACT520 8-Bit Identity Comparator
54ACT521 8-Bit Identity Comparator
54ACT00 Quad 2-Input NAND Gate
54ACT109 Dual JK Positive Edge-Triggered Flip-Flop
54ACT112 Dual JK Negative Edge-Triggered Flip-Flop

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 54AC574 • 54ACT574 Octal D-Type Flip-Flop with TRI-STATE Outputs September 1998 54AC574 • 54ACT574 Octal D-Type Flip-Flop with TRI-STATE ® Outputs General Description The ’AC/’ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CP) transition. The ’AC/’ACT574 is functionally identical to the ’AC/’ACT374 except for the pinouts.
Published: |