Datasheet4U Logo Datasheet4U.com

DS92LV010AEP - Bus LVDS 3.3/5.0V Single Transceiver

Description

The DS92LV010AEP is one in a series of transceivers designed specifically for the high speed, low power proprietary bus backplane interfaces.

The device operates from a single 3.3V or 5.0V power supply and includes one differential line driver and one receiver.

Features

  • flow through which allows easy PCB routing for short stubs between the bus pins and the connector. The driver has 10 mA drive capability, allowing it to drive heavily loaded backplanes, with impedance as low as 27 Ohms. The driver translates between TTL levels (single-ended) to Low Voltage Differential Signaling levels. This allows for high speed operation, while consuming minimal power with reduced EMI. In addition the differential signaling provides common mode noise rejection of ±1V. The rece.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS92LV010A Bus LVDS 3.3/5.0V Single Transceiver Texas Instruments
DS92LV040A 4-Channel Bus LVDS Transceiver Texas Instruments
DS92LV0411 Link-II Serializer/Deserializer Texas Instruments
DS92LV0412 Link-II Serializer/Deserializer Texas Instruments
DS92LV0421 10-MHz to-75 MHz Channel Link-II Serializer/Deserializer Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DS92LV010A Bus LVDS 3.3/5.0V Single Transceiver
DS92LV040A 4 Channel Bus LVDS Transceiver
DS92LV0411 5 - 50 MHz Channel Link II Serializer/Deserializer
DS92LV0412 5 - 50 MHz Channel Link II Serializer/Deserializer
DS92LV0421 10 - 75 MHz Channel Link II Serializer/Deserializer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS92LV010AEP Bus LVDS 3.3/5.0V Single Transceiver www.DataSheet4U.com OBSOLETE DS92LV010AEP June 15, 2009 Bus LVDS 3.3/5.0V Single Transceiver General Description The DS92LV010AEP is one in a series of transceivers designed specifically for the high speed, low power proprietary bus backplane interfaces. The device operates from a single 3.3V or 5.0V power supply and includes one differential line driver and one receiver. To minimize bus loading the driver outputs and receiver inputs are internally connected. The logic interface provides maximum flexibility as 4 separate lines are provided (DIN, DE, RE, and ROUT). The device also features flow through which allows easy PCB routing for short stubs between the bus pins and the connector.
Published: |