Datasheet4U Logo Datasheet4U.com

LM6588 - TFT-LCD Quad/ 16V RRIO High Output Current Operational Amplifier

General Description

The LM6588 is a low power, high voltage, rail-to-rail inputoutput amplifier ideally suited for LCD panel VCOM driver and gamma buffer applications.

The LM6588 contains four unity gain stable amplifiers in one package.

Key Features

  • fast slewing and settling times, along with a high continuous output capability of 75mA. This output stage is capable of delivering approximately 200mA peak currents in order to charge or discharge capacitive loads. These features are ideal for use in TFT-LCDs. The LM6588 is available in the industry standard 14-pin SO package and in the space-saving 14-pin TSSOP package. The amplifiers are specified for operation over the full.
  • 40˚C to +85˚C temperature range. Features (VS = 5V, TA = 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM6588 16V RRIO High Output Current Operational Amplifier Texas Instruments
LM6584 13V RRIO High Output Current Operational Amplifier Texas Instruments
LM6511 3V Comparator Texas Instruments
LM60 SOT-23 or TO-92 Temperature Sensor Texas Instruments
LM60-Q1 SOT-23 Temperature Sensor Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM6511 180 ns 3V Comparator
LM60 2.7V/ SOT-23 or TO-92 Temperature Sensor
LM604 4-Channel Mux-Amp
LM6041 CMOS Single Micropower Operational Amplifier
LM604A 4-Channel Mux-Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM6588 TFT-LCD Quad, 16V RRIO High Output Current Operational Amplifier May 2003 LM6588 TFT-LCD Quad, 16V RRIO High Output Current Operational Amplifier General Description The LM6588 is a low power, high voltage, rail-to-rail inputoutput amplifier ideally suited for LCD panel VCOM driver and gamma buffer applications. The LM6588 contains four unity gain stable amplifiers in one package. It provides a common mode input ability of 0.5V beyond the supply rails, as well as an output voltage range that extends to within 50mV of either supply rail. With these capabilities, the LM6588 provides maximum dynamic range at any supply voltage. Operating on supplies ranging from 5V to 16V, while consuming only 750µA per amplifier, the LM6588 has a bandwidth of 24MHz (−3dB).