LMV1015 - Built-in Gain IC

National Semiconductor

Datasheet Details

Part number	LMV1015
Manufacturer	National Semiconductor
File Size	732.45 KB
Description	Built-in Gain IC
Datasheet	LMV1015_NationalSemiconductor.pdf

The LMV1015 is an audio amplifier series for small form factor electret microphones.

(Typical LMV1015-15, 2.2V supply, RL = 2.2 kΩ, C = 2.2 µF, VIN = 18 mVPP, unless otherwise specified) n Supply voltage 2V - 5V < 180 µA n Supply current n Signal to noise ratio (A-weighted) 60 dB n Output voltage noise (A-weighted).
89 dBV n Total harmonic distortion 0.09% n Voltage gain.
LMV1015-15 15.6 dB.
LMV1015-25 23.8 dB n Temperature range.
40˚C to 85˚C n Large Dome 4-Bump micro SMD package with improved adhesion technology.

📁 LMV1015 Similar Datasheet

LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)
LMV1088 - Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) (ETCTI)
LMV1089 - Dual Input Far Field Noise Suppression Microphone Amp w/ Auto Calibration (Rev. H) (ETCTI)
LMV1090 - LMV1090 Dual Input Far Field Noise Suppression Microphone Amplifier (Rev. I) (ETCTI)
LMV1091 - LMV1091 Dual Input Far Field Noise Suppression Microphone Amplifier (Rev. C) (ETCTI)
LMV1099 - Uplink Far Field Noise Suppression and Downlink SNR Enhancing Microphone Amp (Rev. D) (ETCTI)

Other Datasheets by National Semiconductor

Published: Dec 12, 2008 |