CS5201-3
CS5201-3 is Linear Regulator manufactured by onsemi.
..
CS5201- 3 1.0 A, 3.3 V Fixed Linear Regulator
The CS5201- 3 linear regulator provides 1.0 A @ 3.3 V reference at 1.0 A with an output voltage accuracy of ±1.5%. This regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.2 V at 1.0 A output current. The maximum quiescent current is only 10 m A at full load. Device protection includes overcurrent and thermal shutdown. The CS5201- 3 is pin patible with the LT1086 family of linear regulators. The regulator is available in TO- 220- 3, surface mount D2, and SOT- 223 packages.
Features http://onsemi.
TO- 220- 3 T SUFFIX CASE 221A
3 D2PAK- 3 DP SUFFIX CASE 418AB
Tab = VOUT Pin 1. GND 2. VOUT 3. VIN
- -
- -
- -
Pb- Free Package is Available Output Current to 1.0 A Output Accuracy to ±1.5% Overtemperature Dropout Voltage (typical) 1.0 V @ 1.0 A Fast Transient Response Fault Protection
- Current Limit
- Thermal Shutdown
3 SOT- 223 ST SUFFIX CASE 318E
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.
VOUT
DEVICE MARKING INFORMATION
3.3 V @ 1.0 A
See general marking information in the device marking section on page 6 of this data sheet.
CS5201- 3 GND 10 m F 5.0 V
22 m F 5.0 V
Figure 1. Applications Diagram
© Semiconductor ponents Industries, LLC, 2006
September, 2006
- Rev. 8
Publication Order Number: CS5201- 3/D
CS5201- 3
MAXIMUM RATINGS
Parameter Supply Voltage, VIN Operating Temperature Range Junction Temperature Storage Temperature Range Lead Temperature Soldering: ESD Damage Threshold (Human Body Model) Wave Solder (through hole styles only) (Note 1) Reflow (SMD styles only) (Note 2) Value...
