Datasheet4U Logo Datasheet4U.com

CS5210-1 - 10A LDO 3-Pin Adjustable Linear Regulator

Description

Package Pin Number TO

This pin is connected to the low side of the internally trimmed 2.0% bandgap reference voltage and carries a bias current of about 70 μA.

Features

  • 1.25 V to 4.5 V VOUT at 10 A.
  • Dropout Voltage < 1.05 V @ 10 A.
  • 2.0% Trimmed Reference.
  • Fast Transient Response.
  • Thermal Shutdown.
  • Current Limit.
  • Short Circuit Protection 5.0 V VIN VOUT CS5210.
  • 1 Adj 100 μF 0.1 μF 3.3 V @ 10 A 124 Load 200 300 μF Figure 1.

📥 Download Datasheet

Datasheet Details

Part number CS5210-1
Manufacturer onsemi
File Size 211.42 KB
Description 10A LDO 3-Pin Adjustable Linear Regulator
Datasheet download datasheet CS5210-1 Datasheet

📁 Similar Datasheet

  • CS5210-1 - 10A LDO 3-Pin Adjustable Linear Regulator (Cherry Semiconductor Corporation)
  • CS5210 - HDMI to VGA Convertor (CapSton)
  • CS5210AN - HDMI to VGA Convertor (CapSton)
  • CS5211 - DisplayPort to LVDS Convertor (CapStone)
  • CS5212 - DisplayPort to VGA Convertor (CapSton)
  • CS5213 - HDMI to VGA Convertor (CapStone)
  • CS5216 - Jitter Cleaning 3.0Gbps HDMI Repeater (CapStone)
  • CS5218AN - Jitter Cleaning 3.0Gbps HDMI Repeater (CapSton)
  • CS52-10A - Fast Recovery High Voltage Silicon Rectifiers (Fuji Electric)
  • CS52-12A - Fast Recovery High Voltage Silicon Rectifiers (Fuji Electric)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
CS5210−1 10 A LDO 3−Pin Adjustable Linear Regulator The CS5210−1 linear regulator provides 10 A at adjustable voltages from 1.25 V to 4.5 V. This adjustable device requires two external resistors to set the output voltage and provide the minimum load current for proper regulation. This regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.05 V at 10 A. The regulator is protected against overload conditions with overcurrent and thermal shutdown protection circuitry. The regulator is available in a TO−220 package. Features • 1.25 V to 4.
Published: |