Datasheet4U Logo Datasheet4U.com

CS8122 - Low Dropout Linear Regulator

Description

PACKAGE LEAD # TO

220 5 LEAD 1 2 3 4 5 LEAD SYMBOL VIN VOUT GND Delay RESET FUNCTION Unregulated supply voltage to IC.

Regulated 5.0 V output.

Ground Connection.

Features

  • a tighter tolerance on its output voltage (2.0% vs. 4.0%). The CS8122 is packaged in a 5 lead TO.
  • 220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features http://onsemi. com TO.
  • 220 FIVE LEAD T SUFFIX CASE 314D 1 5 TO.
  • 220 FIVE LEAD TVA SUFFIX CASE 314K 1 TO.
  • 220 FIVE LEAD THA SUFFIX CASE 314A 1 5.
  • 5.0 V ±2.0% Regulated Output Low Dropout Voltage (0.6 V @ 0.5 A) 750 mA Ou.

📥 Download Datasheet

Datasheet Details

Part number CS8122
Manufacturer onsemi
File Size 126.26 KB
Description Low Dropout Linear Regulator
Datasheet download datasheet CS8122 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS8122 2% 5V 750mA Low Dropout Linear Regulator Cherry Semiconductor Corporation
CS8122S 3.0W mono ultra-low EMI / filterless Class-D audio amplifier Chipstar
CS8120 5V/ 300mA Linear Regulator with and ENABLE RESET Cherry Semiconductor Corporation
CS8121 5V/ 1A Linear Regulator with and ENABLE RESET Cherry Semiconductor Corporation
CS8121S Filterless Class-D audio amplifier Chipstar Micro-electronics

Other Datasheets by onsemi

Part Number Description
CS8120 Linear Regulator
CS8126 Low Dropout Linear Regulator
CS8129 Low Dropout Linear Regulator
CS8101 Low Dropout Linear Regulator
CS8147 Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS8122 2.0% 5.0 V, 750 mA Low Dropout Linear Regulator with Delayed RESET The CS8122 is a precision 5.0 V linear regulator capable of sourcing in excess of 750 mA. The RESET’s delay time is externally programmed using a discrete RC network. During power up, or when the output goes out of regulation, the RESET lead remains in the low state for the duration of the delay. This function is independent of the input voltage and will function correctly as long as the output voltage remains at or above 1.0 V. Hysteresis is included in the Delay and the RESET comparators to improve noise immunity. A latching discharge circuit is used to discharge the delay capacitor when it is triggered by a brief fault condition.
Published: |