Datasheet4U Logo Datasheet4U.com

MC74HCT573A Datasheet Octal 3-state Noninverting Transparent

Manufacturer: onsemi

Overview: DATA SHEET www.onsemi.com Octal 3-State Noninverting Transparent Latch MC74HC573A, MC74HCT573A The MC74HC573A / MC74HCT573A is identical in pinout to the LS573. The MC74HC573A device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The MC74HCT573A may be used as a level converter for interfacing TTL or NMOS outputs to High−Speed CMOS inputs. These latches appear transparent to data (i.e., the outputs change asynchronously) when Latch Enable is high. When Latch Enable goes low, data meeting the setup and hold time becomes latched. The HC573A/HCT573A is identical in function to the HC373A/HCT373A but has the data inputs on the opposite side of the package from the outputs to facilitate PC board layout.

Key Features

  • Output Drive Capability: 15 LSTTL Loads.
  • Outputs Directly Interface to CMOS, NMOS, and TTL.
  • Operating Voltage Range: 2.0 to 6.0 V (HC), 4.5 to 5.5 V (HCT).
  • Low Input Current: 1 mA.
  • High Noise Immunity Characteristic of CMOS Devices.
  • In Compliance with the Requirements Defined by JEDEC Standard No. 7 A.
  • Chip Complexity: 234 FETs or 58.5 Equivalent Gates.
  • Q Suffix for Automotive and Other.

MC74HCT573A Distributor

Similar Datasheet

Brand Logo Part Number Description Manufacturer
Motorola Logo MC74HCT573A Octal 3-State Noninverting Transparent Motorola

More Datasheets from onsemi

Part Number Description
MC74HCT574A Octal 3-State Noninverting D Flip-Flop
MC74HCT541A Octal 3-State Non-Inverting Buffer/Line Driver/ Line Receiver
MC74HCT595A 8-Bit Serial-Input/Serial or Parallel-Output Shift Register
MC74HCT04A Hex Inverter
MC74HCT08A Quad 2-Input AND Gate
MC74HCT125A Quad 3-State Noninverting Buffer
MC74HCT132A Quad 2-Input NAND Gate
MC74HCT138A 1-of-8 Decoder/Demultiplexer
MC74HCT14A Hex Schmitt-Trigger Inverter
MC74HCT241A Octal 3-State Noninverting Buffer/Line Driver/Line Receiver