NCD5702 Datasheet | onsemi

features include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active open- drain FAULT output. The driver also features an accurate 5.0 V output and separate high and low (VOH and VOL) driver outputs for system design convenience. The driver is designed to acmodate a wide voltage range of bias supplies including unipolar and bipolar voltages. It is available in a 16- pin SOIC package. Features - High Current Output (+4/- 6 A) at IGBT Miller Plateau Voltages - Low Output Impedance of VOH & VOL for Enhanced IGBT Driving - Short Propagation Delays with Accurate Matching - Direct Interface to Digital Isolator/Opto- coupler/Pulse Transformer for Isolated Drive, Logic patibility for Non- isolated Drive - Active Miller Clamp to Prevent Spurious Gate Turn- on - DESAT Protection with Programmable Delay - Enable Input for Independent Driver Control - Tight UVLO Thresholds for Bias Flexibility - Wide Bias Voltage Range including Negative VEE Capability - This Device is Pb- Free, Halogen- Free and Ro HS pliant Typical Applications - Solar Inverters - Motor Control - Uninterruptible Power Supplies (UPS) - Rapid Shutdown for Photovoltaic Systems .onsemi. MARKING DIAGRAM SOIC- 16 D SUFFIX CASE 751B NCD5702DR2G AWLYWW = Assembly Location WL = Wafer Lot = Year WW = Work Week = Pb- Free Package PIN CONNECTIONS EN 1 VIN 2 VREF 3 FLT 4 GNDA 5 NC 6 RSVD 7 NC 8 16 CLAMP 15 VEEA 14 VEE 13 GND 12 VOL 11 VOH 10 VCC 9 DESAT (Top View) VREF EN VIN DESAT VOH VOL CLAMP GND VEE ORDERING INFORMATION See detailed ordering and shipping information on page 6 of this data...