NCP1595A Datasheet PDF (Current Mode PWM Converter) | Download ON Semiconductor NCP1595A

NCP1595A - Current Mode PWM Converter

Download the NCP1595A datasheet PDF (NCP1595 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for current mode pwm converter.

Description

Figure 1.

Description Feedback input pin of the Error Amplifier.

Connect a resistor divider from the converter’s output voltage to this pin to set the converter’s output voltage.

Features

include cycle.
by.
cycle current limiting, short.
circuit protection and thermal shutdown. Features.
Input Voltage Range: from 4.0 V to 5.5 V.
Internal 140 mW High.
Side Switching P.
Channel MOSFET and 90 mW Low.
Side N.
Channel MOSFET.
Fixed 1 MHz Switching Frequency.
Cycle.
by.
Cycle Current Limiting.
Overtemperature Protection.
Internal Soft.
Start.
Diode Emulat.

📥 Download Datasheet

NCP1595A current mode pwm converter by ON Semiconductor - Datasheet Preview — Note: The manufacturer provides a single datasheet file (NCP1595_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	NCP1595A
Manufacturer	onsemi
File Size	560.76 KB
Description	Current Mode PWM Converter
Datasheet	NCP1595A Datasheet

📁 Similar Datasheet

NCP1500 - Dual Mode PWM/Linear BUCK Converter (ON)

NCP1530 - 600mA PWM/PFM Step-Down Converter (ON)

NCP1550 - 600 kHz PWM/PFM Step-Down DC-DC Controller (ON)

NCP1560 - Full Featured Voltage Mode PWM Controller (ON)

NCP15WB333E03RC - Thermistors (Murata)

NCP15WB333J03RC - Thermistors (Murata)

NCP15WB333x03RC - NTC Thermistors (Murata)

NCP15WB333x03RC - Thermistors (Murata)

NCP15WB473D03RC - Thermistors (Murata)

Full PDF Text Transcription

Click to expand full text

NCP1595, NCP1595A, NCP1595C Buck Regulator- Synchronous 1 MHz, 1.5 A The NCP1595/A/C family are fixed 1 MHz, high−output−current, synchronous PWM converters that integrate a low−resistance, high−side P−channel MOSFET and a low−side N−channel MOSFET. The NCP1595/A/C utilizes current mode control to provide fast transient response and excellent loop stability. It regulates input voltages from 4.0 V to 5.5 V down to an output voltage as low as 0.8 V and is able to supply up to 1.5 A. The NCP1595/A/C includes an internally fixed switching frequency (FSW), and an internal soft−start to limit inrush currents. Using the EN pin, shutdown supply current is reduced to 3 mA maximum. Other features include cycle−by−cycle current limiting, short−circuit protection and thermal shutdown.

Published: Jan 16, 2007 |