Datasheet4U Logo Datasheet4U.com

NCP1595C - Current Mode PWM Converter

Download the NCP1595C datasheet PDF. This datasheet also covers the NCP1595 variant, as both devices belong to the same current mode pwm converter family and are provided as variant models within a single manufacturer datasheet.

General Description

Figure 1.

Description Feedback input pin of the Error Amplifier.

Connect a resistor divider from the converter’s output voltage to this pin to set the converter’s output voltage.

Key Features

  • include cycle.
  • by.
  • cycle current limiting, short.
  • circuit protection and thermal shutdown. Features.
  • Input Voltage Range: from 4.0 V to 5.5 V.
  • Internal 140 mW High.
  • Side Switching P.
  • Channel MOSFET and 90 mW Low.
  • Side N.
  • Channel MOSFET.
  • Fixed 1 MHz Switching Frequency.
  • Cycle.
  • by.
  • Cycle Current Limiting.
  • Overtemperature Protection.
  • Internal Soft.
  • Start.
  • Diode Emulat.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NCP1595_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number NCP1595C
Manufacturer onsemi
File Size 560.76 KB
Description Current Mode PWM Converter
Datasheet download datasheet NCP1595C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP1500 Dual Mode PWM/Linear BUCK Converter ON
NCP1530 600mA PWM/PFM Step-Down Converter ON
NCP1550 600 kHz PWM/PFM Step-Down DC-DC Controller ON
NCP1560 Full Featured Voltage Mode PWM Controller ON
NCP15WB333E03RC Thermistors Murata

Other Datasheets by onsemi

Part Number Description
NCP1595 Current Mode PWM Converter
NCP1595A Current Mode PWM Converter
NCP1592 Synchronous Buck PWM Switcher
NCP1593A Synchronous Buck Regulator
NCP1593B Synchronous Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP1595, NCP1595A, NCP1595C Buck Regulator- Synchronous 1 MHz, 1.5 A The NCP1595/A/C family are fixed 1 MHz, high−output−current, synchronous PWM converters that integrate a low−resistance, high−side P−channel MOSFET and a low−side N−channel MOSFET. The NCP1595/A/C utilizes current mode control to provide fast transient response and excellent loop stability. It regulates input voltages from 4.0 V to 5.5 V down to an output voltage as low as 0.8 V and is able to supply up to 1.5 A. The NCP1595/A/C includes an internally fixed switching frequency (FSW), and an internal soft−start to limit inrush currents. Using the EN pin, shutdown supply current is reduced to 3 mA maximum. Other features include cycle−by−cycle current limiting, short−circuit protection and thermal shutdown.