NCP373 - Over-Voltage and Over-Current protection device

ON Semiconductor

📥 Download Datasheet

NCP373 Datasheet Preview — Preview of NCP373 PDF

Datasheet Details

Part number	NCP373
Manufacturer	ON Semiconductor
File Size	170.92 KB
Description	Over-Voltage and Over-Current protection device
Datasheet	NCP373-ONSemiconductor.pdf

NCP373 Product details

Description

Pin Pin Name Type 1,2 VBUS POWER 3 GND POWER 4 RES1 INPUT 5 RES2 INPUT 6 RES3 INPUT 7 Ilim OUTPUT Description VBUS voltage pins: must be hardwired together on the PCB.These pins are connected to the VBUS connector, and are protected against positive and negative overvoltage events.A 1 mF low ESR ceramic capacitor, or larger, must be connected between these pins and GND.Ground Reserved pin.Must be connected to GND potential and used for IC test.Reserved pin.Must be connected to G

Features

Adjustable Over.
current.
Over.
voltage Protection Up to 28 V and Down to.
28 V.
Logic pins EN and DIR.
Thermal Shutdown.
On.
chip low RDS(on) NMOS Transistors.
Over.
voltage Lockout (OVLO).
Soft.
start.
Real Shutdown Mode.
Alert FLAG Output.
Compliance to IEC61000.
4.
2 (Level 4) 8 kV (Contact) 15 kV (Air).
ESD Ratings: Machine Model = B Hu.

📁 NCP373 Similar Datasheet

NCP304 - Voltage Detector (ON)
NCP305 - Voltage Detector (ON)
NCP3163 - Switching Regulator (On Semiconductor)
NCP3296 - 40A Stackable Synchronous Buck Regulator (onsemi)
NCP345 - Overvoltage Protection (ON)
NCP346 - Overvoltage Protection (onsemi)
NCP-NFJ - C15 Type Accessories (Hirose Electric)
NCP-NFP - C15 Type Accessories (Hirose Electric)

Other Datasheets by ON Semiconductor

NCP370 - Positive and Negative Overvoltage Protection
NCP3712ASN - Over Voltage Protected High Side Switch
NCP372 - Positive and Negative Overvoltage Protection Controller
NCP374 - Overvoltage and over-current protection
NCP300 - Voltage Detector
NCP301 - Voltage Detector

Published: Feb 2, 2016 |