Datasheet Details
| Part number | NCP5269 |
|---|---|
| Manufacturer | onsemi |
| File Size | 166.86 KB |
| Description | Synchronous Buck Controller |
| Download | NCP5269 Download (PDF) |
|
|
Overview: NCP5269 Synchronous Buck Controller with Auto Power Saving Mode and 2-Bit VID Inputs for System Agent NCP5269 is a synchronous buck controller that is optimized for converting the battery voltage or adaptor voltage into power supply rails required in notebook and desktop system. NCP5269 is designed for applications requiring dynamically selected slew−rate controlled output voltages. The soft−start is programmed by a single capacitor. Voltage identification logic−inputs select four resistor programmed set−point reference voltages that directly set the output voltage of the converter between 0.65 V to 1.5 V. NCP5269 supports high efficiency, fast transient response and provides power good signal. ON Semiconductor proprietary adaptive−ripple control enables seamless transition from CCM to DCM, where converter runs at reduced switching frequency with much higher efficiency. The part operates with input voltage ranging from 3.3 V to 28 V. NCP5269 is available in a 20−pin 3 mm x 3 mm QFN package.
| Part number | NCP5269 |
|---|---|
| Manufacturer | onsemi |
| File Size | 166.86 KB |
| Description | Synchronous Buck Controller |
| Download | NCP5269 Download (PDF) |
|
|
|
| Part Number | Description |
|---|---|
| NCP5269A | Synchronous Buck Controller |
| NCP5201 | Dual Output DDR Power Controller |
| NCP5208 | DDR-I/II Termination Regulator |
| NCP5210 | PWM Dual Buck and Linear DDR Power Controller |
| NCP5211 | Low Voltage Synchronous Buck Controller |
| NCP5211A | Low Voltage Synchronous Buck Controller |
| NCP5212A | Single Synchronous Step-Down Controller |
| NCP5212T | Single Synchronous Step-Down Controller |
| NCP5214 | Notebook DDR Power Controller |
| NCP5214A | Notebook DDR Power Controller |