Symbol
Description
FLTREF
Analog Fault Detect Threshold: 5.0 V Compliant
DRN0
DRN5
Analog Drain Feedback: Internally Clamped
GAT0
GAT5
Analog Gate Drive: 5.0 V Compliant
ENA1, ENA2
Digital Master Enable Inputs: 3.3 V/5.0 V (TTL) Compatible
IN0
IN5
Digital Pa
Features
programmable fault management modes and allows power.
limiting PWM operation with programmable refresh time. The device offers 3.3 V/5.0 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5.0 V. Power.
on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled. Each channel independently monitors its external MOSFET’s drain voltage for fault conditions. Shorted load fault detection thresholds are full.
The following content is an automatically extracted verbatim text
from the original manufacturer datasheet and is provided for reference purposes only.
View original datasheet text
NCV7513
FLEXMOSt Hex Low-Side MOSFET Pre-Driver
The NCV7513 programmable six channel low−side MOSFET pre−driver is one of a family of FLEXMOSTM automotive grade products for driving logic−level MOSFETs. The product is controllable by a combination of serial SPI and parallel inputs. It features programmable fault management modes and allows power−limiting PWM operation with programmable refresh time. The device offers 3.3 V/5.0 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5.0 V. Power−on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled.
Each channel independently monitors its external MOSFET’s drain voltage for fault conditions.
NCV7513 Datasheet
