NCV7680 - Linear Current Regulator/Controller

onsemi

General Description

Channel 1 constant current output to LED.

Unused pin should be grounded.

2 VP Supply Voltage Input.

Key Features

Constant Current Outputs for LED String Drive.
LED Drive Current up to 75 mA per Channel.
Open LED String Diagnostic with Open.
Drain Output.
Slew Rate Control Eliminates EMI Concerns.
Low Dropout Operation for Pre.
Regulator.

📥 Download Datasheet

NCV7680 linear current regulator/controller by onsemi - Datasheet Preview

Datasheet Details

Part number	NCV7680
Manufacturer	onsemi
File Size	200.66 KB
Description	Linear Current Regulator/Controller
Datasheet	NCV7680 Datasheet

More Datasheets from onsemi

Part Number	Description
NCV7681	100mA Linear Current Regulator/Controller
NCV7683	Enhanced 100mA Linear Current Regulator/Controller
NCV7685	12 Channels 60mA LED Current Driver
NCV760040	Quad High-side Driver
NCV7601	Quad Driver
NCV7608	Octal Configurable Low/High Side Driver
NCV7691	Current Controller
NCV7692	Current Controller
NCV7693	Automotive LED Controller
NCV7694	Safety Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

NCV7680 Linear Current Regulator and Controller for Automotive LED Rear Combination Lamps The NCV7680 consists of eight linear programmable constant current sources. The part is designed for use in the regulation and control of LED based Rear Combination Lamps for automotive applications. System design with the NCV7680 allows for two brightness levels, one for stop and one for tail illumination, or optional PWM control can also be implemented. Discrete LED brightness levels are easily programmed (stop current value, tail duty cycle value) optional external ballast FET allows for power distribution on designs requiring high currents. Set back power limit reduces the drive current during overvoltage conditions. This is most useful for low current applications when no external FET is used.