NOIH2SM1000A
NOIH2SM1000A is HAS2 Image Sensor manufactured by onsemi.
description of each pin is available in Pin List on page 35.
Soldering Instructions Soldering is restricted to manual soldering only. No wave or reflow soldering is allowed. For manual soldering, the following restrictions are applicable:
- Solder 1 pin on each of the four sides of the sensor.
- Cool down for a minimum period of 1 minute before soldering another pin on each of the four sides.
- Repeat soldering of 1 pin on each side, including a 1 minute cool down period.
Handling Precautions The ponent is susceptible to damage by electro-static discharge. Therefore, use suitable precautions for protection during all phases of manufacture, testing, packaging, shipment, and any handling. Follow these guidelines:
- Always manipulate devices in an ESD controlled environment.
.onsemi.
- Always store the devices in a shielded environment that protects against ESD damage (at least a non-ESD generating tray and a metal bag).
- Always wear a wrist strap when handling the devices and use ESD safe gloves.
- The HAS2 is classified as class 1A (JEDEC classification
- [AD02]) device for ESD sensitivity. For proper handling and storage conditions, refer to the ON Semiconductor application note AN52561.
Return Material Authorization (RMA) ON Semiconductor packages its image sensor products in a clean room environment under strict handling procedures and ships all image sensor products in ESD-safe, clean-room-approved shipping containers. Products returned to ON Semiconductor for failure analysis should be handled under these same conditions and packed in its original packing materials, or the customer may be liable for the product.
Storage Information The ponents must be stored in a dust-free and temperature-, humidity-and ESD-controlled environment.
- Store devices in special ESD-safe trays such that...
