UBA2013L - HB driver IC

This page provides the datasheet information for the UBA2013L, a member of the UBA2013 HB driver IC family.

Product Overview

Philips

Part number	UBA2013L
Manufacturer	Philips
File Size	617.12 KB
Description	HB driver IC
Datasheet	UBA2013L Datasheet
Additional preview pages of the UBA2013L datasheet.

The UBA2013/L3 is a high voltage IC intended to drive and control fluorescent lamps.

The IC can handle both cold and warm ignition of the lamp.

2.1 Half bridge.
Suitable for cold and warm ignition Adjustable preheat time Adjustable ignition voltage Integrated bootstrap function Protection for lamp failure and end-of-life.
Adjustable preheat current Single ignition attempt Automatic restart after relamping Protection for capacitive mode 2.2 PFC.
Three pin PFC controller using TON control.
Critical mode operation.
Overvoltag.

UBA2014 - 600V driver IC (NXP)
UBA2015 - (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver (NXP Semiconductors)
UBA2015A - (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver (NXP Semiconductors)
UBA2016A - (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver (NXP Semiconductors)
UBA2017 - 600V fluorescent lamp driver (NXP)
UBA2017A - 600V fluorescent lamp driver (NXP)
UBA2000T - Electronic TL-lamp starter (NXP)
UBA2021 - 630 V driver IC for CFL and TL lamps (NXP)
UBA2024 - Half-bridge power IC (NXP)
UBA2025 - CFL power IC (NXP Semiconductors)

Other Datasheets by Philips

Published: Nov 27, 2013 |