HBT060ZGHH-A Datasheet | Power-One

Features - - - - - - - - - - - - 60 Watts maximum total output power Three fully isolated outputs 5V/12V/12V 5V output provides up to 12 Amps (2) 12V outputs each provide up to 2.5 Amps Excellent cross regulation Low profile - 12.7 mm High efficiency topology, 88% Typical Output overcurrent & overvoltage protection Overtemperature protection Set point accuracy ± 2.0% 1500V Input/output isolation meets basic insulation requirements UL 1950 Recognized, CSA 22.2 No. 950-95 certified; TUV IEC950 Applications - - - - - - Distributed power architectures Data and Telemunications Equipment puter Equipment Distributed power architectures LAN/WAN applications Data processing applications Description The HBT17ZGHH DC-DC Converter operates over an input voltage range of 33Vdc to 75Vdc and provides three isolated output voltages. The 5V output can provide a full 60W (12 Amperes) of output power and each 12V output can provide up to 30W (2.5 Amperes) of output power. The input is fully isolated from each output and each output is isolated from one another. The isolation of each output provides flexible output configurations and separate output returns, which are important in preventing cross-interference between different loads in system applications. The module has a typical full load efficiency of 88%. The two-board construction optimizes thermal performance. Power devices are connected to an Integrated Metal Substrate base plate to minimize thermal impedance and a separate control board is physically isolated from the hotter IMS board. This approach allows for lower average ponent temperatures on the control board and increases the overall reliability. The prehensive standard feature set includes remote on/off, and output trim. Selection Chart Model Input voltage range, VDC 33-75 Input current, max, ADC 3.0 Output voltage, VDC Output rated current, ADC 12/2.5/2.5 Output Ripple and Noise, m V p-p 125/150/150 Efficiency % 5.0/12.2/12.2 REV. 10/01...