Datasheet4U Logo Datasheet4U.com

RM6513 - PWM Control 2A Step-Down Converter

General Description

RM6513 consists of step-down switching regulator with PWM control.

These devices include a reference voltage source, oscillation circuit, error amplifier, internal PMOS and etc.

RM6513 provides low-ripple power, high efficiency, and excellent transient characteristics.

Key Features

  • as low current consumption. Since this conv.

📥 Download Datasheet

Datasheet Details

Part number RM6513
Manufacturer REACTOR
File Size 207.79 KB
Description PWM Control 2A Step-Down Converter
Datasheet download datasheet RM6513 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RM6 POWER TRANSFORMER MODULES FPE
RM6 xDSL POTs Splitter Sumida Corporation
RM6004R Power Transformers GROUP-TEK
RM6005AR N-Channel Enhancement Mode Power MOSFET Rectron
RM600DY-66S Fast Recovery Diode Module Powerex Power Semiconductors

Other Datasheets by REACTOR

Part Number Description
RM6203 High Performance Current Mode PWM Switching Power Supply Controller
RM6204 Advanced overload and full load Flow protection switching technology power management
RM6221S PWM controller
RM6222D PWM controller
RM6222D 12V 1A high performance current mode PWM controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DESCRIPTION RM6513 consists of step-down switching regulator with PWM control. These devices include a reference voltage source, oscillation circuit, error amplifier, internal PMOS and etc. RM6513 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%. An enable function, an over current protect function and a short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced from 380KHz to 35KHz. Also, an internal compensation block is built in to minimum external component count.