Datasheet4U Logo Datasheet4U.com

BD6222FP - DC Brush Motor Drivers

Download the BD6222FP datasheet PDF. This datasheet also covers the BD6220F variant, as both devices belong to the same dc brush motor drivers family and are provided as variant models within a single manufacturer datasheet.

Description

These H-bridge drivers are full bridge drivers for brush motor applications.

Each IC can operate at a power supply voltage range of 6V to 15V, with output currents of up to 2A.

MOS transistors in the output stage allow PWM speed control.

Features

  • Built-in Selectable One Channel or Two Channels Configuration.
  • VREF Voltage Setting Pin Enables PWM Duty Control.
  • Cross-Conduction Prevention Circuit.
  • Four Protection Circuits Provided: OCP, OVP, TSD and UVLO Key Specifications.
  • Supply Voltage Range:.
  • Maximum Output Current:.
  • Output ON-Resistance:.
  • PWM Input Frequency Range:.
  • Standby Current:.
  • Operating Temperature Range: 18V(Max) 0.5A / 1.0A / 2.0A 1.5Ω / 1.5Ω / 1.0Ω 20kHz to 100kHz 0μA (Typ.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (BD6220F-ROHM.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number BD6222FP
Manufacturer ROHM
File Size 1.12 MB
Description DC Brush Motor Drivers
Datasheet download datasheet BD6222FP Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD620 PNP SILICON EPIBASE TRANSISTORS Siemens Semiconductor Group
BD6200CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Pan Jit International
BD6200CT SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Pan Jit International
BD601 (BD6xx) Silicon Power Transistor ETC
BD605 (BD6xx) Silicon Power Transistor ETC

Other Datasheets by ROHM

Part Number Description
BD6222FP H-bridge driver
BD62220AEFV DC Brush Motor Drivers
BD6222HFP DC Brush Motor Drivers
BD6222HFP H-bridge driver
BD6220F DC Brush Motor Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet DC Brush Motor Drivers (18V Max) BD622xxx Series General Description These H-bridge drivers are full bridge drivers for brush motor applications. Each IC can operate at a power supply voltage range of 6V to 15V, with output currents of up to 2A. MOS transistors in the output stage allow PWM speed control. The integrated VREF voltage control function allows direct replacement of discontinued motor driver ICs. These highly efficient H-bridge driver ICs facilitate low-power consumption design.
Published: |