BV1HD090FJ-C Overview
BV1HD090FJ-C is an automotive 1ch high side switch IC, which has built-in overcurrent limiting circuit(OCP), thermal shutdown circuit(TSD), open load detection function (OLD) and under voltage lockout function (UVLO). It is also equipped with the diagnostic output when detecting an error (ST). SOP -J8 Applications Onboard vehicle device (engine ECU, air conditioner, body-control etc ) Block Diagram Figure.
BV1HD090FJ-C Key Features
- AEC-Q100 qualified (Note 1)
- Built-in overcurrent limiting circuit (OCP)
- Built-in thermal shutdown circuit (TSD)
- Built-in open load detection function (at output OFF)
- Direct control enabled from CMOS logic IC, etc
- Built-in under voltage lockout function
- Built-in Output State Pin
- On-Resistance RON=90mΩ(Typ)
- Monolithic power management IC with the control
- Enables operation at low voltage down to 4.2V