Datasheet4U Logo Datasheet4U.com

HD74HC353 - Dual 4-to-1-line Data Selectors/Multiplexers

Description

Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data selection to the AND-OR-invert gates.

Separate strobe inputs (G) are provided for each of the two four-line sections.

Features

  • High Speed Operation: tpd (Data to Y) = 13 ns typ (CL = 50 pF).
  • High Output Current: Fanout of 10 LSTTL Loads.
  • Wide Operating Voltage: VCC = 2 to 6 V.
  • Low Input Current: 1 µA max.
  • Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C).
  • Ordering.

📥 Download Datasheet

Datasheet preview – HD74HC353

Datasheet Details

Part number HD74HC353
Manufacturer Renesas
File Size 175.63 KB
Description Dual 4-to-1-line Data Selectors/Multiplexers
Datasheet download datasheet HD74HC353 Datasheet
Additional preview pages of the HD74HC353 datasheet.

📁 Similar Datasheet

  • HD74HC353 - Dual 4-to-1-line Data Selectors/Multiplexers (with 3-state outputs) (Hitachi Semiconductor)
  • HD74HC352 - Dual 4-to-1-line Data Selectors/Multiplexers (Hitachi Semiconductor)
  • HD74HC354 - 8-to-1-line Data Selectors/Multiplexer Register(with 3-state outputs) (Hitachi Semiconductor)
  • HD74HC356 - 8-to-1-line Data Selectors/Multiplexer/Register(with 3-state outputs) (Hitachi Semiconductor)
  • HD74HC30 - 8-input NAND Gate (Hitachi Semiconductor)
  • HD74HC32 - Quad. 2-input OR Gates (Hitachi Semiconductor)
  • HD74HC323 - 8-bit Universal Shift/Storage Register (with 3-state Outputs) (Hitachi Semiconductor)
  • HD74HC365 - Hex Bus Drivers (with 3-state outputs) (Hitachi Semiconductor)
  • HD74HC366 - Hex Bus Drivers (with 3-state outputs) (Hitachi Semiconductor)
  • HD74HC367 - Hex Bus Drivers (noninverted Data Outputs with 3-state outputs) (Hitachi Semiconductor)
Other Datasheets by Renesas

Full PDF Text Transcription

Click to expand full text
HD74HC353 Dual 4-to-1-line Data Selectors/Multiplexers REJ03D0612–0200 (Previous ADE-205-491) Rev.2.00 Jan 31, 2006 Description Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data selection to the AND-OR-invert gates. Separate strobe inputs (G) are provided for each of the two four-line sections. The three-state outputs can interface with and drive data lines of bus-organized systems. With all but one of the common output disabled (at a high-impedance state) the low-impedance of the single enable output will drive the bus line to a high or low logic level. Each output has its own strobe (G). The output is disabled when its strobe is high.
Published: |