Datasheet4U Logo Datasheet4U.com

UPG2176T5N - HIGH POWER SPDT SWITCH

General Description

which was developed for WiMAX.

This device can operate frequency from 2.3 to 5.85 GHz, having the low insertion loss and high isolation.

Key Features

  • Control voltage : Vcont (H) = 2.5 to 5.0 V (3.0 V TYP. ) : Vcont (L) =.
  • 0.3 to 0.3 V (0 V TYP. ).
  • Low insertion loss : Lins1 = 0.45 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins2 = 0.55 dB TYP. @ f = 3.3 to 3.8 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins3 = 0.70 dB TYP. @ f = 4.9 to 5.85 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V.
  • High isolation : ISL1 = 27 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : ISL.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UPG2176T5N Non-Reflective High Power SPDT Switch CEL
UPG2179TB L & S-BAND MEDIUM POWER SPDT SWITCH NEC
UPG2106TB L-BAND PA DRIVER AMPLIFIER NEC
UPG2110TB L-BAND PA DRIVER AMPLIFIER NEC
UPG2118K 1.5W GaAs MMIC POWER AMPLIFIER CEL

Other Datasheets by Renesas

Part Number Description
UPG2214TB GaAs MMIC
UPG2411T6R GaAs Integrated Circuit SPDT Switch
UPG2411T7C GaAs Integrated Circuit SPDT Switch
UPG2413T6M SP3T SWITCH
UPG2413T6Z GaAs Integrated Circuit SP3T Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET GaAs INTEGRATED CIRCUIT μPG2176T5N 50 Ω TERMINATION TYPE HIGH POWER SPDT SWITCH FOR WiMAX DESCRIPTION The μPG2176T5N is a GaAs MMIC 50 Ω termination type high power SPDT (Single Pole Double Throw) switch which was developed for WiMAX. This device can operate frequency from 2.3 to 5.85 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin plastic TSON (Thin Small Out-line Non-leaded) package. And this package is able to high-density surface mounting. FEATURES • Control voltage : Vcont (H) = 2.5 to 5.0 V (3.0 V TYP.) : Vcont (L) = −0.3 to 0.3 V (0 V TYP.) • Low insertion loss : Lins1 = 0.45 dB TYP. @ f = 2.3 to 2.7 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Lins2 = 0.55 dB TYP. @ f = 3.3 to 3.8 GHz, Vcont (H) = 3.