Datasheet4U Logo Datasheet4U.com

SST55LD019M - ATA Flash Disk Controller

Description

SST’s ATA Flash Disk Controller is the heart of a highperformance, flash media-based data storage system.

The ATA Flash Disk Controller recognizes the control, address, and data signals on the ATA/IDE bus and translates them into memory accesses to the standard NANDtype flash media.

Features

  • Industry Standard ATA/IDE Bus Interface.
  • Host Interface: 8- or 16-bit access.
  • Supports up to PIO Mode-4.
  • Supports up to Multi-word DMA Mode-2.
  • Interface for standard NAND Flash Media.
  • Flash Media Interface: 8-bit or 16-bit access - Supports up to 8 flash media devices directly - Supports up to 64 flash media devices with external decoding logic.
  • Supports Multi-Level Cell (MLC) and high density Single-Level Cell (SLC) flash media -.

📥 Download Datasheet

Datasheet Details

Part number SST55LD019M
Manufacturer SST
File Size 1.00 MB
Description ATA Flash Disk Controller
Datasheet download datasheet SST55LD019M Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SST500 Current Regulator Diode Calogic
SST500 CURRENT REGULATING DIODES LINEAR SYSTEMS
SST501 Current Regulator Diode Calogic
SST501 CURRENT REGULATING DIODES LINEAR SYSTEMS
SST5018 Switching Micross

Other Datasheets by SST

Part Number Description
SST55LD019A (SST55LD019x) ATA Flash Disk Controller
SST55LD019B (SST55LD019x) ATA Flash Disk Controller
SST55LD019C (SST55LD019x) ATA Flash Disk Controller
SST55LC100 CompactFlash Card Controller
SST11LP11 High-Linearity Power Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com ATA Flash Disk Controller SST55LD019M SST55LD019MHigh-Performance ATA Flash Disk Controller Advance Information FEATURES: • Industry Standard ATA/IDE Bus Interface – Host Interface: 8- or 16-bit access – Supports up to PIO Mode-4 – Supports up to Multi-word DMA Mode-2 • Interface for standard NAND Flash Media – Flash Media Interface: 8-bit or 16-bit access - Supports up to 8 flash media devices directly - Supports up to 64 flash media devices with external decoding logic – Supports Multi-Level Cell (MLC) and high density Single-Level Cell (SLC) flash media - 2 KByte program page size only • Low power, 3.3V core operation • 5.0V or 3.3V host interface through VDDQ pins • Low current operation: – Active mode: 25 mA/35 mA (3.3V/5.
Published: |