29F160BB Datasheet - STMicroelectronics

29F160BB Boot Block Single Supply Flash Memory

The M29F160B is a 16Mbit (2Mb x8 or 1Mb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The memory is divided into .

M29F160BT M29F160BB 16 Mbit (2Mb x8 or 1Mb x16, Boot Block) Single Supply Flash Memory PRELIMINARY DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS TIME: 55ns PROGRAMMING TIME 8µs per Byte/Word typical 35 MEMORY BLOCKS 1 Boot Block (Top or Bottom Location) 2 Parameter and 32 Main Blocks www.DataSheet4U.com s ACCESS s s s PROGRAM/ERASE CONTROLLER Embedded Byte/Word Program algorithm Embedded Multi-Block/Chip Erase al.

29F160BB Features

* set/Block Temporary Unprotect goes High, V IH, the memory will be ready for Bus Read and Bus Write operations after tPHEL or tRHEL, whichever occurs

29F160BB_STMicroelectronics.pdf