Datasheet4U Logo Datasheet4U.com

29F160BE - 16M (2M X 8/1M X 16) BIT

General Description

The MBM29F160TE/BE is a 16M-bit, 5.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each.

The MBM29F160TE/BE is offered in a 48-pin TSOP (I) package.

The device is designed to be programmed in-system with the standard system 5.0 V VCC supply.

Key Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The MBM29F160TE/BE is erased when shipped from the factory. The device features single 5.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Dat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
29F160BB Boot Block Single Supply Flash Memory STMicroelectronics
29F160BT Boot Block Single Supply Flash Memory STMicroelectronics
29F160D Boot Sector Flash Memory AMD
29F160E Boot Sector Flash Memory Excel Semiconductor
29F1610A 16M-BIT [2M x8/1M x16] CMOS SINGLE VOLTAGE FLASH EEPROM Macronix International

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
29F160TE 16M (2M X 8/1M X 16) BIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20879-2E FLASH MEMORY CMOS 16M (2M × 8/1M × 16) BIT MBM29F160TE/BE-55/-70/-90 s GENERAL DESCRIPTION The MBM29F160TE/BE is a 16M-bit, 5.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each. The MBM29F160TE/BE is offered in a 48-pin TSOP (I) package. The device is designed to be programmed in-system with the standard system 5.0 V VCC supply. 12.0 V VPP is not required for write or erase operations. The device can also be reprogrammed in standard EPROM programmers. The standard MBM29F160TE/BE offers access times of 55 ns, 70 ns and 90 ns, allowing operation of high-speed microprocessors without wait states.