Datasheet4U Logo Datasheet4U.com

29F160BB - Boot Block Single Supply Flash Memory

General Description

The M29F160B is a 16Mbit (2Mb x8 or 1Mb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single 5V supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Key Features

  • set/Block Temporary Unprotect goes High, V IH, the memory will be ready for Bus Read and Bus Write operations after tPHEL or tRHEL, whichever occurs.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M29F160BT M29F160BB 16 Mbit (2Mb x8 or 1Mb x16, Boot Block) Single Supply Flash Memory PRELIMINARY DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS TIME: 55ns PROGRAMMING TIME – 8µs per Byte/Word typical 35 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 32 Main Blocks www.DataSheet4U.com s ACCESS s s s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP48 (N) 12 x 20mm s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.