Datasheet4U Logo Datasheet4U.com

29F160BT - Boot Block Single Supply Flash Memory

Download the 29F160BT datasheet PDF. This datasheet also covers the 29F160BB variant, as both devices belong to the same boot block single supply flash memory family and are provided as variant models within a single manufacturer datasheet.

General Description

The M29F160B is a 16Mbit (2Mb x8 or 1Mb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single 5V supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Key Features

  • set/Block Temporary Unprotect goes High, V IH, the memory will be ready for Bus Read and Bus Write operations after tPHEL or tRHEL, whichever occurs.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (29F160BB_STMicroelectronics.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
29F160BE 16M (2M X 8/1M X 16) BIT Fujitsu Media Devices
29F160D Boot Sector Flash Memory AMD
29F160E Boot Sector Flash Memory Excel Semiconductor
29F160TE 16M (2M X 8/1M X 16) BIT Fujitsu Media Devices
29F1610A 16M-BIT [2M x8/1M x16] CMOS SINGLE VOLTAGE FLASH EEPROM Macronix International

Other Datasheets by STMicroelectronics

Part Number Description
29F160BB Boot Block Single Supply Flash Memory
29F002 2 Mbit 256Kb x8 / Boot Block Single Supply Flash Memory
29F010 1 Mbit 128Kb x8 / Uniform Block Single Supply Flash Memory
29F040 4 Mbit 512Kb x8 / Uniform Block Single Supply Flash Memory
29F200 2 Mbit 256Kb x8 or 128Kb x16 / Boot Block Single Supply Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M29F160BT M29F160BB 16 Mbit (2Mb x8 or 1Mb x16, Boot Block) Single Supply Flash Memory PRELIMINARY DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS TIME: 55ns PROGRAMMING TIME – 8µs per Byte/Word typical 35 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 32 Main Blocks www.DataSheet4U.com s ACCESS s s s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP48 (N) 12 x 20mm s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.