Datasheet Details
| Part number | M29W008B |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 219.24 KB |
| Description | 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| Datasheet |
 M29W008B Datasheet
|
|
|
| Part number | M29W008B |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 219.24 KB |
| Description | 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| Datasheet |
M29W008B Datasheet
|
|
|
|
The M29W008 is a non-volatile memory that may be erased electrically at the block or chip level and programmed in-system on a Byte-by-Byte basis using only a single 2.7V to 3.6V VCC supply.
For Program and Erase operations the necessary high voltages are generated internally.
The device can also be programmed in standard programmers.
M29W008T M29W008B 8 Mbit (1Mb x8, Boot Block) Low Voltage Single Supply Flash Memory NOT FOR NEW DESIGN M29W008T and M29W008B are replaced respectively by the M29W008AT and M29W008AB 2.7V to 3.6V SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS FAST ACCESS TIME: 100ns FAST PROGRAMMING TIME: 10µs typical PROGRAM/ERASE CONTROLLER (P/E.C.
| Part Number | Description |
|---|---|
| M29W008AB | 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W008AT | 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W008DB | 8 Mbit 3V Supply Flash Memory |
| M29W008DT | 8 Mbit 3V Supply Flash Memory |
| M29W008T | 8 Mbit 1Mb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W002BB | 2 Mbit 256Kb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W002BT | 2 Mbit 256Kb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W004B | 4 Mbit 512Kb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W004BB | 4 Mbit 512Kb x8 / Boot Block Low Voltage Single Supply Flash Memory |
| M29W004BT | 4 Mbit 512Kb x8 / Boot Block Low Voltage Single Supply Flash Memory |