SMC50J18A Datasheet | STMicroelectronics

Features - Peak pulse power: - 5000 W (10/1000 μs) - up to 48 k W (8/20 μs) - Stand-off voltage range from 5 V to 100 V - Unidirectional type - Low leakage current: 0.2 µA at 25 °C - Operating Tj max: 175 °C - JEDEC registered package outline - Resin meets UL94, V0 - Lead finishing: matte tin plating plies with the following standards - UL94, V0 - J-STD-020 MSL level 1 - J-STD-002, JESD 22-B102 E3 and MIL-STD-750, method 2026 - JESD-201 class 2 whisker test - IPC7531 footprint and JEDEC registered package outline - IEC 61000-4-4 level 4: - 4k V - IEC 61000-4-2, C = 150 p F, R = 330 Ω exceeds level 4: - 30 k V (air discharge) - 30 k V (contact discharge) Description The SMC50J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 5000 W 10/1000 μs. This planar technology makes it patible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS13862 - Rev 1 - November 2021 For further information contact your local STMicroelectronics sales office. .st. SMC50Jxx A Characteristics Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter VPP Peak pulse voltage IEC 61000-4-2 (C = 150 p F, R = 330 Ω) Contact discharge Air discharge PPP Peak pulse power dissipation Tj initial = Tamb Tstg Storage temperature...