Datasheet4U Logo Datasheet4U.com

uClamp5011ZA - 5V ESD Protection

Description

µClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD.

They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Features

  • large cross-sectional area junctions for conducting high transient currents. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. µClamp®5011ZA features extremely good ESD protection characteristics highlighted by low typical dynamic resistance of 0.15 Ohms, low peak ESD clamping voltage, and high ESD withstand voltage (+/-15kV contact per IEC 61000-4-2). Low maximum capacitance (5pF a.

📥 Download Datasheet

Datasheet preview – uClamp5011ZA

Datasheet Details

Part number uClamp5011ZA
Manufacturer SEMTECH
File Size 587.15 KB
Description 5V ESD Protection
Datasheet download datasheet uClamp5011ZA Datasheet
Additional preview pages of the uClamp5011ZA datasheet.

📁 Similar Datasheet

  • UCLAMP0501H - 1-Line ESD protection (Semtech Corporation)
  • UCLAMP0501P - 1-Line ESD protection (Semtech Corporation)
  • UCLAMP0501T - 1-Line ESD protection (Semtech Corporation)
  • UCLAMP0502P - 2-Line ESD protection (Semtech Corporation)
  • UCLAMP0502T - 2-Line ESD protection (Semtech Corporation)
  • UCLAMP0504A - 4-Line ESD protection Array (Semtech Corporation)
  • UCLAMP0504T - Low Profile Clamp 4-Line ESD Protection (Semtech Corporation)
  • UCLAMP0505A - 5-Line ESD protection Array (Semtech Corporation)
  • UCLAMP0506A - 5-Line ESD protection Array (Semtech Corporation)
  • UCLAMP0506P - 6-Line ESD protection Array (Semtech Corporation)
Other Datasheets by Semtech

Full PDF Text Transcription

Click to expand full text
PROTECTION PRODUCTS - µClamp® Description µClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. µClamp®5011ZA features extremely good ESD protection characteristics highlighted by low typical dynamic resistance of 0.15 Ohms, low peak ESD clamping voltage, and high ESD withstand voltage (+/-15kV contact per IEC 61000-4-2).
Published: |