Datasheet4U Logo Datasheet4U.com

uClamp03321PQ - 1-Line ESD & Surge Protection

General Description

electronics from damage or latch-up due to ESD.

They feature large cross-sectional area junctions for conducting high transient currents.

Key Features

  • extremely good protection characteristics highlighted by high surge current capability (50A, tp = 8/20μs), low peak ESD clamping voltage, and high ESD withstand voltage (± 30kV per IEC 61000-4-2). μClamp03321PQ is qualified to AEC-Q100 (Grade 1) and AEC-Q101 for automotive and industrial.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCLAMP0501H 1-Line ESD protection Semtech Corporation
UCLAMP0501P 1-Line ESD protection Semtech Corporation
UCLAMP0501T 1-Line ESD protection Semtech Corporation
UCLAMP0502P 2-Line ESD protection Semtech Corporation
UCLAMP0502T 2-Line ESD protection Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
uClamp0301PQ Low Voltage TVS
uClamp0601ZV 1-Line ESD & Surge Protection
uClamp0761ZV 1-Line ESD & Surge Protection
uClamp0801T 1-Line ESD protection
UCLAMP1211Z 1-Line ESD Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
μClamp03321PQ μClamp® 1-Line ESD & Surge Protection Description µClamp®series are designed to protect sensitive electronics from damage or latch-up due to ESD. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. μClamp03321PQ is in a DFN 1.0 x 0.6 x 0.55mm 2-Lead package. Each device will protect one bi-directional line operating at ±3.3 volts. μClamp03321PQ features extremely good protection characteristics highlighted by high surge current capability (50A, tp = 8/20μs), low peak ESD clamping voltage, and high ESD withstand voltage (± 30kV per IEC 61000-4-2).