8051F330 Datasheet | Silicon Labs

C8051F330/1/2/3/4/5 Mixed Signal ISP Flash MCU Family Analog Peripherals - 10-Bit ADC (‘F330/2/4 only) - Up to 200 ksps - Up to 16 external single-ended or differential inputs - VREF from internal VREF, external pin or VDD - Internal or external start of conversion source - Built-in temperature sensor - 10-Bit Current Output DAC (‘F330 only) - parator - Programmable hysteresis and response time - Configurable as interrupt or reset source - Low current (0.4 µA) On-Chip Debug .. - On-chip debug circuitry facilitates full speed, nonintrusive in-system debug (no emulator required) Provides breakpoints, single stepping, inspect/modify memory and registers Superior performance to emulation systems using ICE-chips, target pods, and sockets Low cost, plete development kit High Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler Memory - 768 bytes internal data RAM (256 + 512) - 8 k B (‘F330/1), 4 k B (‘F332/3), or 2 k B (‘F334/5) Flash; In-system programmable in 512-byte Sectors- 512 bytes are reserved in the 8 k B devices Digital Peripherals - 17 Port I/O; All 5 V tolerant with high sink current - Hardware enhanced UART, SMBus™, and enhanced SPI™ serial ports Four general purpose 16-bit counter/timers 16-Bit programmable counter array (PCA) with three capture/pare modules Real time clock mode using PCA or timer and external clock source Supply Voltage 2.7 to 3.6 V - Typical operating current: 6.4 m A at 25 MHz; 9 µA at 32 k Hz - Typical stop mode current: 0.1 µA Temperature Range: - 40 to +85...