Diagonal 6.0mm (Type 1/3) Progressive Scan CCD Image Sensor for Color Cameras
The ICX445AQA is a diagonal 6.0mm (Type 1/3) interline CCD solid-state image sensor with a square pixel
array and 1.25M effective pixels.
Progressive scan enables all pixel signals to be output separately within 1/22.5 second.
The sensitivity and smear are improved drastically through the adoption of EXview HAD CCD technology.
� Supports following modes
All-pixel scan mode (15 frame/s, 12.5 frame/s, 22.5 frame/s: ���)
Center cut-out mode (30 frame/s, 25 frame/s)
� Horizontal drive frequency: 36.0MHz, 29.0MHz
� R, G, B primary color filters on chip
� High resolution, high sensitivity, low dark current, low smear
� Excellent anti-blooming characteristics
� No voltage adjustments (Reset gate and substrate bias need no adjustment.)
� 24-pin high precision plastic package (Dual-surface reference available)
24-pin DIP (Plastic)
* EXview HAD CCD is a trademark of Sony Corporation. The EXview HAD CCD is a CCD that drastically improves light efficiency
by including near infrared light region as a basic structure of HAD (Hole-Accumulation Diode) sensor.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license
by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating
the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.