Datasheet4U Logo Datasheet4U.com

THCV242 - SerDes receiver

Description

THCV242 is designed to support 1080p60 2Mpixel uncompressed video data over 15m 100ohm differential STP or single-end 50ohm Coaxial cable with 4 in-line connectors between camera and processor by V-by-One® HS.

THCV242 supports a MIPI CSI-2.

Each CSI-2 data lane can transmit up to 1.2Gbps/lane.

Features

  • MIPI CSI-2 with 1,2 or 4-lane output.
  • MIPI D-PHY supports 80Mbps~1.2Gbps.
  • MIPI Virtual channel supported.
  • Video formats: RAW8/10/12/14/16/20, YUV422/420, RGB888/666/565, JPEG, Userdefined generic 8-bit.
  • V-by-One® HS 400Mbps~4Gbps x2lane.
  • V-by-One® HS standard version1.5.
  • Video stream switch and copy/distribution.
  • Frame sync remote supply scheme for multiple camera stream synchronization.
  • Wide range IO voltage from 1.7V to 3.6V.
  • 2-wire serial int.

📥 Download Datasheet

Datasheet preview – THCV242

Datasheet Details

Part number THCV242
Manufacturer THine Electronics
File Size 863.44 KB
Description SerDes receiver
Datasheet download datasheet THCV242 Datasheet
Additional preview pages of the THCV242 datasheet.
Other Datasheets by THine Electronics

Full PDF Text Transcription

Click to expand full text
THCV242_ Rev.1.00_E THCV242 SerDes receiver with bi-directional transceiver 1. General Description THCV242 is designed to support 1080p60 2Mpixel uncompressed video data over 15m 100ohm differential STP or single-end 50ohm Coaxial cable with 4 in-line connectors between camera and processor by V-by-One® HS. THCV242 supports a MIPI CSI-2. Each CSI-2 data lane can transmit up to 1.2Gbps/lane. Virtual channel is supported. MIPI 2nd port output supports data copy and distribution. One high-speed V-by-One® HS lane can transmit up to 1080p60fps. The maximum serial data rate is 4Gbps/lane. 2nd input lane supports HDR large amount of data or camera switch experience. THCV242 is capable to control and monitor remote camera module from MPU via GPIO or 1Mbps 2wire serial interface.
Published: |