Datasheet4U Logo Datasheet4U.com

OPB806 - Slotted Optical Switch

Description

The OPB806 slotted optical switch consists of an infrared emitting diode (LED) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.175 mm) wide slot.

The OPB806 has two sets of mounting tabs allowing Base or Side mounting of the device.

Features

  • Non-contact switching.
  • Base or side mounting.
  • 0.125” (3.175 mm) slot width.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPB804 Slotted Optical Switch OPTEK
OPB821 Slotted Optical Switches OPTEK
OPB821S10 Slotted Optical Switches OPTEK
OPB821S3 Slotted Optical Switches OPTEK
OPB821S5 Slotted Optical Switches OPTEK

Other Datasheets by TT Electronics

Part Number Description
OPB800 Optical Switch
OPB800L Optical Switch
OPB800W Optical Switch
OPB801 Optical Switch
OPB801L Optical Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Slotted Optical Switch OPB806 Features:  Non-contact switching  Base or side mounting  0.125” (3.175 mm) slot width Description: The OPB806 slotted optical switch consists of an infrared emitting diode (LED) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.175 mm) wide slot. The OPB806 has two sets of mounting tabs allowing Base or Side mounting of the device. The LED and phototransistor leads project from each side of the housing on 0.050” (1.27 mm) centers. Phototransistor switching takes place whenever an opaque object passes through the slot.
Published: |